Camshafts on all 2007 Twin 96" and 2006 Dyna engines use roller chain drives instead of silent chains. Camshafts made for 1999-2005 engines will not fit the '06 Dynas or new 2007 Twin 96" engines. 2006 Road Glides, Road Kings, ElectraGlides and all Softail models still run earlier silent chain drives. All of the cam grinds listed below are designed for use with stock hydraulic lifters. Twin 96" bikes and 2006 Dynas will have the same performance characteristics as earlier bikes with similar cam grinds. Matching EZ-install pushrods kits are also available from Andrews Products. EZ-install pushrods do not require removal of gas tanks or rocker boxes when installing bolt-in camshafts.
|
Part # |
Grind | Timing(*) | Duration | Valve Lift | Lift @ TDC | Springs | Application | |
| .053 | .020 | |||||||
| Stock | Intake | -3.5/40 | 216.5 | 256 | .474 | .087 | Stock | Stock '06 cam data listed for reference: All 2007 Twin 96" and '06 Dynas are fuel injection only; no carburetors. |
| Exhaust | 41/-1.5 | 219.5 | 259 | .474 | .110 | |||
| 216321 | 21H | 10/30 | 220 | 255 | .498 | .134 | Stock | Bolt-in cams: 88 and 96 inches - more torque for heavy bikes. Intended for stock compression ratios and pistons. Similar to #23 cam for EV80. (1700-4800 RPM). |
| 40/08 | 228 | 264 | .498 | .121 | ||||
| 216326 | 26H | 11/35 | 226 | 262 | .490 | .138 | Stock | Bolt-in cams: 88 and 96 inches - stock compression ratio. Great for two-up touring, this cam will add torque and HP at lower and middle RPM ranges. (1800-5200 RPM). |
| 41/09 | 230 | 266 | .490 | .112 | ||||
| 216331 | 31H | 10/46 | 236 | 272 | .510 | .131 | Stock | Great cam for motors with 95+ inches and 10.1 CR. Lower TDC lift for easy installation. Similar to 37G but different timing. (2000-5800 RPM). |
| 52/08 | 240 | 276 | .510 | .120 | ||||
| 216337 | 37H | 18/38 | 236 | 272 | .510 | .171 | Stock | Hot street cams for 88, 96 or 103 inches. 80+ rear wheel HP possible with well-tuned motors. Smooth idle, broad torque (2200-5600 RPM). Stock to 9.5 CR. |
| 46/14 | 240 | 276 | .510 | .148 | ||||
| 216344 | 44H | 21/41 | 242 | 279 | .495 | .182 | Stock | For 88, 96 or 103 inches and 9.5+ CR. Max. torque and HP at mid and upper RPM. (2300-5800 RPM). |
| 49/17 | 246 | 283 | .495 | .158 | ||||
| 216350 | 50H | 20/48 | 248 | 283 | .510 | .184 | Stock | Designed for easy installation in 96-103 inch motors with stock heads and 9.5 to 9.8 CR. (2400-6000 RPM). |
| 54/18 | 252 | 287 | .510 | .168 | ||||
| 216355 | 55H | 22/46 | 248 | 283 | .550 | .197 | Hi-lift | Great cams for 95-103 inch engines with 9.8 to 10.2 CR. Max HP - torque at mid and upper RPMs. (2600-6200). |
| 58/22 | 252 | 292 | .550 | .181 | ||||
| 216360 | 60H | 24/56 | 260 | 296 | .560 | .205 | Hi-lift | For well-prepped 95-103 inchers with 10.0 to 10.5 CR, 100+ HP is within reach. (2700-6500+ RPM). |
| 58/22 | 260 | 296 | .560 | .205 | ||||
|
(*) Timing and duration listed for .053 cam lift. |
||||||||
ANDREWS PRODUCTS, INC.
431 Kingston Ct., Mt. Prospect, IL 60056
Phone 847-759-0190 Fax 847-759-0848
andrewsproducts.com