Andrews Products performance cams are available for all EV Sportster engines.
The cams listed below will run to 6500 RPM with stock hydraulic lifters. H/D
hydraulic lifters are very proven units and we recommend that they not be
changed to solid lifters. Our EV Sportster cams use stock base circle sizes so
stock (nonadjustable) pushrods can be used (except V9 or BV). Adjustable
aluminum or chrome-moly steel pushrods are also available.
2000 and later Sportster # 2 cams have drive gears with 46 teeth.
1991-1999 Sportster #2 cams have drive gears with 36 teeth.
1991-1999 cam gear sets can be converted to fit 2000 and later engines.
EV Sportster Adjustable Length Pushrods
Part #292020: 4 aluminum pushrods; '86-90
Part #292090: 4 chrome-moly steel rods; '86-90
Part #292030: 4 aluminum pushrods; '91 and up
Part #292085: 4 chrome-moly steel rods; '91 and up
EV Sportster Fixed Length Pushrods
Part #292025: 4 aluminum pushrods; '91 and up
Part #292095: 4 chrome-moly steel rods; '91 and up
High Lift Evolution Springs
Part #294150: 4 inner and 4 outer springs. When used with titanium spring
collars, cam lifts of .550+ can easily be accommodated. Head machining is not
required.
Titanium Upper Spring Collars
Part #293110: 4 titanium upper spring collars. Fit all Evolution Sportster
engines. They are stronger than stock, .050" more spring travel, 50% lighter and
install with stock keepers.
| Part # | Year | Grind | Timing(*) |
Duration |
Max Lift |
TDC Lift |
Application | |
| 0.053 | 0.020 | |||||||
| Stock | (86-91) | D | 02/41 41/02 |
223 223 |
270 270 |
0.458 0.458 |
0.094 0.094 |
Listed for comparison. V series cams listed fit '86-90 engines. (Note: 1986-1987 exhaust cam lift is .414) |
| Stock | (91-up) | W | 08/26 36/14 |
234 230 |
272 270 |
0.470 0.470 |
.0122 0.122 |
Stock Sportster cam data listed for comparison. Late cams marked "D" ('91 and later) have same specs as "W" cams. |
| 298120 | (86-90) | V2 | 22/38 46/18 |
240 244 |
290 290 |
0.465 0.440 |
0.180 0.155 |
Bolt-in cams for stock 883, 1100 or 1200 engines. More duration and lift means extra power through RPM range. Stock springs and hydraulic lifters recommended. 2000-6000 RPM. |
| 298125 | (91-99) | N2 | ||||||
| 298130 | 2000-up)** | N2 | ||||||
| 298180 | (2005-up)** | N3 | 17/33 43/11 |
240 234 |
278 270 |
0.465 0.482 |
0.216 0.216 |
Bolt-in power for '05-later 883-1200 engines with stock springs-heads. Cams for '05 & later heads with more than .515 lift may need different valves, springs, and collars. |
| 298140 | (86-90) | V4 |
30/46 52/24 |
256 256 |
296 296 |
0.490 0.490 |
0.216 0.189 |
Street/Drags: Stock or modified 883 & 1200. Slightly higher idle speed but stock springs and hydraulic lifters are recommended. RPM range: 2000-6000. |
| 298145 | (91-99) | N4 | ||||||
| 298150 | (2000-up)** | N4 | ||||||
| 298180 | (86-90) | V8 | 32/44 56/28 |
256 264 |
296 302 |
0.490 0.500 |
0.226 0.212 |
Modified 1100-1200, stroked 883's with stock springs and hydraulic lifters. Same intake cam as N4 but more exhaust cam duration. Great mid-range power: 2000-6500 RPM. |
| 298185 | (91-99) |
N8 |
||||||
| 298190 | (2000-up)** | N8 | ||||||
| 298160 | (86-90) | V6 | 34/50 56/28 |
264 264 |
302 302 |
0.500 0.500 |
0.241 0.212 |
Modified 1200s to 80 inches and/or high comp-pistons. Stock springs and hydraulic lifters recommended. RPM: 2500-6800. |
| 298165 | (91-99) | N6 | ||||||
| 298170 | (2000-up)** | N6 | ||||||
| 214210 | (86-90) | V9 | 33/53 53/33 |
266 266 |
309 309 |
0.555 0.555 |
0.240 0.240 |
Med. lift cams for stroked engines from 80-88 inches. Broad torque range to 6000+ RPM with hydraulics. Andrews springs, collars, and pushrods required. (1991-up need long pushrods.) |
| 214215 | (91-99) | N9 | ||||||
| 214219 | (2000-up)** | N9 | ||||||
| 214265 | (86-90) | BV | 35/59 59/35 |
274 274 |
316 316 |
0.590 0.590 |
0.260 0.260 |
Hi-lift cams for 88+ inches. Andrews pushrods, springs, and collars required. BV/NV cams start easy and run strong: 2000-6000+ RPM with hydraulic lifters. (1991-up require long pushrods.) |
| 214268 | (91-99) | NV | ||||||
| 214272 | (2000-up)** | NV | ||||||
| (*) Timing listed for .053 lift figures. | ||||||||
| (**) 2000 and later Sportster engines require a different #2 drive gear than 1991-1999 engines. | ||||||||
ANDREWS PRODUCTS, INC.
431 Kingston Ct., Mt. Prospect, IL 60056
Phone 847-759-0190 Fax 847-759-0848
andrewsproducts.com